Spare part for 6m wide Commercial DIY Marquee range

Part 8: 140degree 3 way curved joint with tab

Made from 42mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£6.00 up to 30KG)

Spare part for 6m wide Commercial DIY Marquee range

Part 9: 140degree 4 way curved joint with tab

Made from 42mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£6.00 up to 30KG)

Spare part for 6m wide Party Tent DIY Marquee

Part 14: Middle flush foot plate.

Made from 38mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£6.00 up to 30KG)

Spare part for 6m wide Party Tent DIY Marquee

Part 1: 151cm roof pole.

Made from 38mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£12.00 up to 30KG)

Spare part for 6m wide Party Tent DIY Marquee

Part 10: 4 way flat joint (connector) + tab.

Made from 42mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£6.00 up to 30KG)

Spare part for 6m wide Party Tent DIY Marquee

Part 11: 3 way flat joint (connector) + tab.

Made from 42mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£6.00 up to 30KG)

Spare part for 6m wide Party Tent DIY Marquee

Part 12: corner foot plate.

Made from 38mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.

Delivery charge for spare parts is added at the checkout (£6.00 up to 30KG)

Spare part for 6m wide Party Tent DIY Marquee

Part 13: Middle or straight foot plate

Made from 38mm steel galvanised pipe.

Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.