Back to top

Help Pages

Marquees

3m Marquees

4m Marquees

6m Marquees

9m Marquees

Walkways

Packages

Linings

Accessories

Spare Parts for 6m Party Tents

6m Party Tent Part 1

Spare part for 6m wide Party Tent DIY Marquee
Part 1: 151cm roof pole.
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 2

Spare part for 6m wide Party Tent DIY Marquee
Part 2: 194cm Leg/Purlin/Ground bar.
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 4

Spare part for 6m wide Party Tent DIY Marquee
Part 4: 150cm eave/roof brace.
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 5

Spare part for 6m wide Party Tent DIY Marquee
Part 5: 50cm vertical roof brace.
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 6

Spare part for 6m wide Party Tent DIY Marquee
Part 6: 3 way curved joint (connector).
Made from 42mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 7

Spare part for 6m wide Party Tent DIY Marquee
Part 7: 4 way curved joint (connector).
Made from 42mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 8

Spare part for 6m wide Party Tent DIY Marquee
Part 8: 3 way curved joint (connector) + tab.
Made from 42mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 9

Spare part for 6m wide Party Tent DIY Marquee
Part 9: 4 way curved joint (connector) + tab.
Made from 42mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 10

Spare part for 6m wide Party Tent DIY Marquee
Part 10: 4 way flat joint (connector) + tab.
Made from 42mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 11

Spare part for 6m wide Party Tent DIY Marquee
Part 11: 3 way flat joint (connector) + tab.
Made from 42mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 12

Spare part for 6m wide Party Tent DIY Marquee
Part 12: corner foot plate.
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 13

Spare part for 6m wide Party Tent DIY Marquee
Part 13: Middle or straight foot plate
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.


6m Party Tent Part 14

Spare part for 6m wide Party Tent DIY Marquee Part 14: Middle flush foot plate.
Made from 38mm steel galvanised pipe.
Please note that our spare parts are unlikely to be compatible with other makes of marquee even if they look similar.